Instrument Interview Question and Answer- 2020||Mechanical||Engineer||Gauge||caliper||Micrometer||

Instrument Interview Question and Answer- 2020

Question Number: 1 what is CALIPER?

Answer: Caliper is an Instrument used for measuring distances between or over surfaces, or for comparing dimensions of work piece with such standards as plug gauges, graduated rules etc.

Question Number: 2 what is DIAL GAUGE?

Answer: Dial gauge is Instrument indicating the movement of a projecting plunger by the movement of a hand or pointer over a graduated dial.

Question Number: 3 what is GAUGE?

Answer: A tool or instrument for checking or measuring the sizes of metal parts to determine whether the dimensions are within the specified limits.

Question Number: 4 what is INDICATOR?

Answer: Indicator is a sensitive instrument which shows slight variations when testing the trueness, or alignment of a work piece, fixture or machine part such as a milling vice. Dial indicators may be graduated to read small linear variations.

Question Number: 5 what is MICROMETER?

Answer: Micrometer is a precision, screw adjusted measuring instrument with which dimensions can be read in thousandths and ten thousandths of an inch.

Question Number: 6 what is PYROMETER?

Answer: Pyrometer is a Specified type of thermometer used to measure high temperatures in the production and heat treatment of metals and alloys.

Question Number: 7 what is TORQUE METER?

Answer: Torque meter is a Torsion measuring device fitted to a rotating shaft or component to measure the torque developed at any given moment under actual running conditions.

Question Number: 8 what is VERNIER CALIPE?

Answer: Vernier calipers is a Precision measuring instrument consisting of a beam or rule having a fixed jaw at one end, and a straight jaw to which is attached a vernier scale.

Watch the video to get full answer...............